Eden

The David Series By Eden Is Probably The Fastest-Growing Bass Amplification System On The Market. It's Gone From Being A Virtual Unknown To The Choice Of Top Players Such As Alain Caron, Kim Stone, Otiel Burbridge, And Gary WillisIn A Remarkably Short Period. The Amps, Cabs, And Preamps Represent A Truly State Of The Art, World Class Product. Eden's Line Of Amplifiers Range From 300-800 Watts, All Equipped With Sophisticated Equalization Sections. The Newly Introduced Navigator Is Fast Becoming A Top Contender In The Bass Preamp Market. Their Wide Array Of Speaker Systems Range From The D110BWWedge Monitor To The Ever Popular, Number One Selling 410XLTExtended Low End Cab.

New : Neo Series Combos


Dave Nordschow (Eden Designer/Founder in Middle) and Dan Mills (Eden Sales Rep Far right) visited Bass Central recently (May 21st 2008) for a visit and Sushi dinner. Shown here with several members of the BC Staff (Mike, Ed, and Beaver, Left to right) holding some of their Top Eden Dealer Award Plaques.

 

 

Dave Nordschow (Eden Designer/Founder in Middle) and Dan Mills (Eden Sales Rep Far right) visited Bass Central recently (May 21st 2008) for a visit and Sushi dinner. Shown here with several members of the BC Staff (Mike, Ed, and Beaver, Left to right) holding some of their Top Eden Dealer Award Plaques.

 



World Tour Heads

 

Features include 300 watts @ 8Ω OR 4Ω, 4 band tone controls, overdrive, selectable damping, compression with bypass, available with 6 x 6550 power tubes. 1⁄4“ and NL-4 output connections. International voltage selection. Classic vacuum tube sound.

Features include 300 watts @ 8Ω OR 4Ω, 4 band tone controls, overdrive, selectable damping, compression with bypass, available with 6 x 6550 power tubes. 1⁄4“ and NL-4 output connections. International voltage selection. Classic vacuum tube sound.

*Eden VT300B

Features include 300 watts @ 8Ω OR 4Ω, 4 band tone controls, overdrive, selectable damping, compression with bypass, available with 6 x 6550 power tubes. 1⁄4“ and NL-4 output connections. International voltage selection. Classic vacuum tube sound.

VT300B SPECS

Power

300 W RMS

Power Mono Bridge

N/A

Distortion

<.2%

Frequency Response

10Hz-15KHz

Headroom

3dB

Dimensions

19"w x 7"h x 11.5"d

Weight

40 LBS

 

Retail $3089 Sale $2162

Since its introduction 12 years ago, the WT-800 World Tour has been the number one choice of our touring endorsers. Our new “C” version now boasts an improved cooling system and more power. Conservatively rated at 440 Watts (4Ω) per side with both channels driven, and 880W bridged into 8Ω and a whopping 1100 Watts bridged into 4Ω (with a minimum of 3dB of headroom), the WT800C is still the perfect choice for the touring professional. Standard features include: switchable automatic compression, mute, five-way semi-parametric tone control, electronic crossover, pre and post effect loops, stereo aux inputs, DI out with ground lift, level and pre-/post-EQ select, headphone out, tuner out, and a thermostatically controlled fan.

World Tour-800C

 Since its introduction 12 years ago, the WT-800 World Tour has been the number one choice of our touring endorsers. Our new “C” version now boasts an improved cooling system and more power. Conservatively rated at 440 Watts (4Ω) per side with both channels driven, and 880W bridged into 8Ω and a whopping 1100 Watts bridged into 4Ω (with a minimum of 3dB of headroom), the WT800C is still the perfect choice for the touring professional. Standard features include: switchable automatic compression, mute, five-way semi-parametric tone control, electronic crossover, pre and post effect loops, stereo aux inputs, DI out with ground lift, level and pre-/post-EQ select, headphone out, tuner out, and a thermostatically controlled fan.

 

WT800C SPECS

Power 8Ω/4Ω/2Ω

2 X 440W RMS @ 4Ω

Power Mono Bridge

880W RMS @ 8Ω

Distortion

<.1%

Frequency Response

10Hz - 15KHz ±2dB

Headroom

3dB

Dimensions

17"w x 3.5"h x 12"d

Weight

26 LBS

Retail  $2,499.90 / Sale $ 1749.00



Over a decade ago, we set the standard in bass amps with our WT800. Now we’re raising it significantly higher with our newest and most sophisticated integrated amp ever – the WT1205.

World Tour-1205

Over a decade ago, we set the standard in bass amps with our WT800. Now we’re raising it significantly higher with our newest and most sophisticated integrated amp ever – the WT1205.
Dual 7025 preamp tubes drive two separate channels that can be used individually or blended for dual channel instruments (the Stick, e.g.). Each channel features Dynamic Bass and Treble boosters, a unique EQ center (4-band on Ch. 1, 3-band w/ sweepable mid on Ch.2), dual effects loops (pre and post) and variable compression. Using automix technology, the studio-quality DI (selectable pre- or post-EQ) always sends the active channel(s) to the console.
Dial in your sounds and then pump up to 2400 watts peak power (1200 watts RMS), enough to drive a variety of compatible multiple-speaker arrays. Execute changes on the fly with the included footswitch, including: Mute, channel switching, Master Gain Booster (the solo button) and Enhance bypass.
The WT1205 now offers the discriminating bassist more power, more versatility, more musicality than ever before. It also features our new back-lit logo. One test drive and you’ll be spoiled for life. And that’s not necessarily a bad thing.

WT1205 SPECS

Power 8Ω/4Ω/2Ω

2x500/600 RMS 4/2Ω

Power Mono Bridge

1200/1000W RMS 4/8Ω

Distortion

<.05%

Frequency Response

10Hz-20KHz ±2dB

Headroom

3dB

Dimensions

17"W X 3.5"H X 13"D

Weight

26 LBS

  Retail $2499.90 Sale $1999




You’ll find the WT550 Traveler to be unsurpassed in the market for its compact size. The WT550 Traveler, is a hybrid tube design rated at 750 watts at 2Ω with a minimum of 3dB of headroom. Standard features include: low noise compact design, -12dB input pad, switchable automatic compression, five-way semi-parametric tone control, mono pre and stereo post tone control effects loops, stereo aux inputs, DI out with ground lift, headphone out, tuner out, and a thermostatically controlled fan.

World Tour 550

You’ll find the WT550 Traveler to be unsurpassed in the market for its compact size. The WT550 Traveler, is a hybrid tube design rated at 750 watts at 2Ω with a minimum of 3dB of headroom. Standard features include: low noise compact design, -12dB input pad, switchable automatic compression, five-way semi-parametric tone control, mono pre and stereo post tone control effects loops, stereo aux inputs, DI out with ground lift, headphone out, tuner out, and a thermostatically controlled fan.

 

WT550 SPECS

Power 8Ω/4Ω/2Ω

300/500/750W RMS

Power Mono Bridge

N/A

Distortion

<.05%

Frequency Response

10Hz - 15KHz ±2dB

Headroom

3dB

Dimensions

12"W x 3.5"H x 12"D

Weight

20 LBS

Retail $1499 Sale $1199.00



This is our newest generation of bass amplifiers. The Time Traveler features a warm, studio sound quality and very low noise levels. A redesigned sloped front panel allows easy access to the simplified control section with mid shift and bypass. A dbx style compressor with adjustable threshold is coupled to dual inputs and the renowned Eden enhance control. The Time Traveler has an etirely new feature, an optically coupleddynamic smart booster for bass and treble. This allows for the bass and highs to be solid and well defined from a whisper to a roar. It automatically compensates for playing level so that the sound quality is maintained. Additional features include multiple patch points, auxiliary inputs, variable distortion, pre/post DI section, mute to tune, and a built in practice mode. Audition one at your local Eden dealer. Retail $1,298.00 Sale $1038.00

 

World Tour - 405

This is Eden's newest generation of bass amplifiers. The Time Traveler features a warm, studio sound quality and very low noise levels. A redesigned sloped front panel allows easy access to the simplified control section with mid shift and bypass. A dbx style compressor with adjustable threshold is coupled to dual inputs and the renowned Eden enhance control. The Time Traveler has an etirely new feature, an optically coupleddynamic smart booster for bass and treble. This allows for the bass and highs to be solid and well defined from a whisper to a roar. It automatically compensates for playing level so that the sound quality is maintained. Additional features include multiple patch points, auxiliary inputs, variable distortion, pre/post DI section, mute to tune, and a built in practice mode. Audition one at your local Eden dealer.

 

WT405 SPECS

Power 8Ω/4Ω/2Ω

250/405/620W RMS

Power Mono Bridge

N/A

Distortion

<.05%

Frequency Response

10Hz - 15KHz ±2dB

Headroom

3dB

Dimensions

13"W x 3.5"H x 12"D

Weight

15 LBS

Retail $1,299.00 Sale $999.00




The WTX-260 is the perfect amplifier for players who need a full-featured amp that will fit in the pocket of the average gig bag. “We designed the WTX-260 for the traveling musician, especially those who travel internationally” said David Nordschow, Eden’s founder and Chief Engineer. “You can slip this amp into the pocket of most gig bags, and you can use it anywhere in the world with no modifications. Just attach the appropriate power cord and play away. The amplifier automatically senses and adjusts itself to local voltage.”

WTX-260

The WTX-260 is the perfect amplifier for players who need a full-featured amp that will fit in the pocket of the average gig bag. “We designed the WTX-260 for the traveling musician, especially those who travel internationally” said David Nordschow, Eden’s founder and Chief Engineer. “You can slip this amp into the pocket of most gig bags, and you can use it anywhere in the world with no modifications. Just attach the appropriate power cord and play away. The amplifier automatically senses and adjusts itself to local voltage.”
The pre-amplifier section of the WTX-260 is based on the Golden Ear chip for amazing warmth and musicality. This is the same chip used in ultra-high-end recording consoles and is more expensive – and more musical – than the chips used by other manufacturers. Powered by a unique Analog Switching Amplifier that delivers 260W to 300W RMS (>500W peak, @ 4Ω w/ +3dB headroom), depending on local voltage conditions, the WTX-260 has an impressive list of features, including:

  • Eden’s proprietary Enhance control
  • 3-band EQ with Dynamic Bass Boost and Mid-shift functions
  • Switchable automatic compression
  • Studio-quality DI with level, ground lift and Pre/Post-EQ select
  • -12dB Input Pad
  • FX loop
  • Stereo Aux Inputs
  • Tuner and Headphone outputs
  • Two 1/4" and one NL-4 (Speakon) Speaker outputs
  • Optional Footswitch for Mute and Enhance Bypass functions
  • Optional Rack-mount hardware
  • Made in USA

All the tone & features you've come to expect from Eden in an ultra-compact (3.8 lbs.) package. You know you want one!

 

WTX260 SPECS

Power 4Ω

260-300W* RMS @4Ω

Damping Factor

4000

Distortion

.006%

Frequency Response

10Hz-20KHz ±2dB

Headroom

3dB

Dimensions

8"W X 2.5"H X 9"D

Weight

3.8 LBS

Retail $799.00 Sale $599.00




Our WP100 preamp features a tube input stage, dbx type compression with variable threshold and rate controls, tube character control, enhance control, the famous Eden semi-parametric eq, front panel D.I. output control, mono pre-eq loop, stereo post-eq loop, side-chain loop with front panel blend pot, variable crossover, stereo led output meters, tuner out, a set of stereo and mono XLR outputs, and a defeatable limiter. The front panel switches that defeat the compressor, enhance, mute, and turbo boost are duplicated on a lighted footswitch that connects via a standard, easily replaceable midi cable.

WP-100 Navigator

Our WP100 preamp features a tube input stage, dbx type compression with variable threshold and rate controls, tube character control, enhance control, the famous Eden semi-parametric eq, front panel D.I. output control, mono pre-eq loop, stereo post-eq loop, side-chain loop with front panel blend pot, variable crossover, stereo led output meters, tuner out, a set of stereo and mono XLR outputs, and a defeatable limiter. The front panel switches that defeat the compressor, enhance, mute, and turbo boost are duplicated on a lighted footswitch that connects via a standard, easily replaceable midi cable.

 

WP100 SPECS

Power

N/A

Power Mono Bridge

N/A

Distortion

<.01%

Frequency Response

10Hz - 20KHz ±2dB

Headroom

N/A

Dimensions

17"w x 3.5"h x 12"d

Weight

12 LBS


Retail  $1099 Sale $879




Features include 2 x 430 watts @ 4Ω, 1000 watts RMS mono bridged @ 4Ω with a minimum of 3db of headroom. Balanced inputs, dual ¼" plugs, binding post, NL-4 output connections, international voltage selection and tone balance. The WT 1250 also has front panel bridge, mono, stereo switch and automatic output limiting for maximum playability. Companion to the WP100.

World Tour - 1250

Features include 2 x 430 watts @ 4Ω, 1000 watts RMS mono bridged @ 4Ω with a minimum of 3db of headroom. Balanced inputs, dual ¼" plugs, binding post, NL-4 output connections, international voltage selection and tone balance. The WT 1250 also has front panel bridge, mono, stereo switch and automatic output limiting for maximum playability. Companion to the WP100.

 

WT1250 SPECS

Power 4Ω

2x430W RMS

Power Mono Bridge

1250W RMS @ 4Ω

Distortion

<.06%

Frequency Response

10Hz - 20KHz ±2dB

Headroom

3dB

Dimensions

17"w x 3.5"h x 14.5"d

Weight

28 LBS

Retail  $1499.00 Sale $1199.00




At Last! Eden Carry Bag Fits WT405 and WT-550 Well-padded, reinforced, 3 zipper pouches/plenty of space for cords, strings, tuners, power strip, accessories, etc. $75 Delivered!

At Last! Eden Carry Bag Fits WT405 and WT-550 Well-padded, reinforced, 3 zipper pouches/plenty of space for cords, strings, tuners, power strip, accessories, etc. $75 Delivered!


David Series Combos

The new DC210XLT is the answer to requests for our highly acclaimed World Tour and David Series in a combo format. Our goal in designing the Metro was to create a self-contained unit that sacrificed none of the performance of our separates. The Metro’s dual channel preamplifier section gives you the choice of a tube or solid state preamp, with full footswitch control. Each channel includes an independent effects loop, with 500 watts into 4 Ohms (over 750 watts into 2 Ohms). The Metro truly outclasses any 210 combo on the market today. Standard features include, switchable automatic compression, 5-way semiparametric tone control and electronic crossover, independent channel effects loops, stereo aux input, headphone out, tuner mute on footswitch, internal speaker on/off, and -12dB pad. Footswitch and casters are included.

DC 210 XLT "Metro"

The new DC210XLT is the answer to requests for our highly acclaimed World Tour and David Series in a combo format. Our goal in designing the Metro was to create a self-contained unit that sacrificed none of the performance of our separates. The Metro’s dual channel preamplifier section gives you the choice of a tube or solid state preamp, with full footswitch control. Each channel includes an independent effects loop, with 500 watts into 4 Ohms (over 750 watts into 2 Ohms). The Metro truly outclasses any 210 combo on the market today. Standard features include, switchable automatic compression, 5-way semiparametric tone control and electronic crossover, independent channel effects loops, stereo aux input, headphone out, tuner mute on footswitch, internal speaker on/off, and -12dB pad. Footswitch and casters are included.

DC210XLT SPECS

Power 8Ω/4Ω/2Ω

300/500/750W RMS

Distortion

<.05%

Frequency Response

48Hz - 14KHz ±2dB

Headroom

3dB

Speaker

EC-1060XL Cast Frame

Speaker Power Handling

250W RMS

Tweeters

E-2700

Crossover

2.5KHz @ 18dB

Impedance

8Ω

Dimensions

23"w x 24"h x 18.5"d

Weight

78 LBS

Retail $2099 Sale $1599




We have merged the popular WT330 amplifier system with our D112XLT enclosure. In doing so, we have redefined the standard for small professional bass guitar combo systems. The DC112XLT is equipped with a proprietary spring loaded, flip down support foot that lets you kick back the unit for perfect near field, high angle positioning, without having to use an odd box shape. The DC112XLT has amazing tone quality and a massive output for such a small unit.

DC 112 XLT

We have merged the popular WT330 amplifier system with our D112XLT enclosure. In doing so, we have redefined the standard for small professional bass guitar combo systems. The DC112XLT is equipped with a proprietary spring loaded, flip down support foot that lets you kick back the unit for perfect near field, high angle positioning, without having to use an odd box shape. The DC112XLT has amazing tone quality and a massive output for such a small unit.

 

DC112XLT SPECS

Power 8Ω/4Ω/2Ω

200/330/420W RMS

Damping Factor

4000

Distortion

<.05%

Frequency Response

32Hz - 14KHz ±2dB

Headroom

3dB

Speaker

EC-1260ME Cast Frame

Speaker Power Handling

250W RMS

Tweeters

E-2700 Cast Bell

Crossover

2.5KHz @ 18dB

Impedance

8Ω

Dimensions

14.5D x 21.75W x 19.25H

Weight

49 Lbs.

Retail $1549.90 Sale $1199



Neo Series Combos

Eden is proud to introduce the new ultra light weight 1x10" combo featuring our highly acclaimed WTX-260 amplifier unit. It features an Eden designed high output Neodymium 10" loudspeaker and our E2600 Neo tweeter. The versatility is enhanced by a kick back foot assembly for near field playing angles. A folding top handle, along with a snap off roll away wheel/handle set completes the handling package. All plywood construction and unsurpassed tone quality make this a perfect rig for intimate venues and pit orchestra settings.

ENC110 Combo

Eden is proud to introduce the new ultra light weight 1x10" combo featuring our highly acclaimed WTX-260 amplifier unit. It features an Eden designed high output Neodymium 10" loudspeaker and our E2600 Neo tweeter. The versatility is enhanced by a kick back foot assembly for near field playing angles. A folding top handle, along with a snap off roll away wheel/handle set completes the handling package. All plywood construction and unsurpassed tone quality make this a perfect rig for intimate venues and pit orchestra settings.

ENC110 SPECS

SPEAKERS

EC-10NXS Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5KHz @ 18dB

POWER HANDLING

200W RMS

FREQ. RESPONSE

50hz - 14khz ±2dB

SENSITIVITY

98dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

 

WEIGHT

 

WTX260 SPECS

Power 4Ω

260-300W* RMS @4Ω

Damping Factor

4000

Distortion

.006%

Frequency Response

10Hz-20KHz ±2dB

Headroom

3dB

Dimensions

8"W X 2.5"H X 9"D

Weight

3.8 LBS

Retail $1199.90 Sale $899.00



The big brother to our ENC110 this 12" unit has more of everything, more punch, more bass and more tone. At only 37 lbs., this compact WTX-260 equipped power house is just slightly larger than our very popular D112XLT. The unit includes a kick back foot assembly for near field playing, and a folding top handle, along with a snap off roll away wheel/handle set that makes this unit a snap to move. It is a great rig for electric or upright bass, able to handle small and medium size venues with ease.

ENC112 Combo

The big brother to our ENC110 this 12" unit has more of everything, more punch, more bass and more tone. At only 37 lbs., this compact WTX-260 equipped power house is just slightly larger than our very popular D112XLT. The unit includes a kick back foot assembly for near field playing, and a folding top handle, along with a snap off roll away wheel/handle set that makes this unit a snap to move. It is a great rig for electric or upright bass, able to handle small and medium size venues with ease.

ENC112 SPECS

SPEAKERS

EC-12NM Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

2.5KHz @ 18dB

POWER HANDLING

250W RMS

FREQ. RESPONSE

50hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

 

WEIGHT

 

WTX260 SPECS

Power 4Ω

260-300W* RMS @4Ω

Damping Factor

4000

Distortion

.006%

Frequency Response

10Hz-20KHz ±2dB

Headroom

3dB

Dimensions

8"W X 2.5"H X 9"D

Weight

3.8 LBS

 

Retail $1299.90 Sale $975.00



David Series XLT Cabinets

How do you withstand the massive onslaught of Rocco Prestia's hard driving technique? Simple: You build one of the toughest and best sounding cabinets on the planet. And that's just what we've done with our new D810RP. Developed for, and in conjunction with the legendary Rocco Prestia, this new cabinet can stand up to even the hardest-driving players.

D810 RP

How do you withstand the massive onslaught of Rocco Prestia's hard driving technique? Simple: You build one of the toughest and best sounding cabinets on the planet. And that's just what we've done with our new D810RP. Developed for, and in conjunction with the legendary Rocco Prestia, this new cabinet can stand up to even the hardest-driving players.

D810RP SPECS

SPEAKERS

EC-1040RP Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

1200W RMS @4Ω

FREQ. RESPONSE

38hz - 14khz ±2dB

SENSITIVITY

106dB SPL@1W1M

IMPEDANCE

4Ω

DIMENSIONS

22.9"w x 45.5"h x 16.25"d

WEIGHT

140 LBS

Retail $1859 Sale $1489


NSP410 4 or 8 Ohm Retail $824 Sale $659

D610XLT

Is an 810 too big and a 410 too small? Then get a multi ported 610. Great punch and growl, perfect for large stages where you need to get on top of the mix, with a protective metal grill, tweeter protection, back caster, and handles. The new D610XLT, includes EC- 1060XL cast frame speakers, and gives you all of the low mid punch of the 810 with good portability and great bass response.

D610XLT SPECS

SPEAKERS

EC-1060XL Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

1050W RMS

FREQ. RESPONSE

50hz - 14khz ±2dB

SENSITIVITY

107dB SPL@1W1M

IMPEDANCE

6Ω

DIMENSIONS

23”w x 38.5”h x 16”d

WEIGHT

130 LBS

Retail $1699.90 Sale $1359


The top performer’s choice world-wide, our D410 XLT is the current industry standard for 410 enclosures. The optimally tuned, dual ported enclosure design provides our exclusive XL model drivers with increased power handling. The XL’s increased forward throw, additional 2 octave low-end response and live, aggresive sound make its performance unsurpassed for main stage and high level applications. Well balanced killer tone with great growl.

D410 XLT

The top performer’s choice world-wide, our D410 XLT is the current industry standard for 410 enclosures. The optimally tuned, dual ported enclosure design provides our exclusive XL model drivers with increased power handling. The XL’s increased forward throw, additional 2 octave low-end response and live, aggresive sound make its performance unsurpassed for main stage and high level applications. Well balanced killer tone with great growl.


D410XLT SPECS

SPEAKERS

EC-1060XL Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

700W RMS

FREQ. RESPONSE

50hz - 14khz ±2dB

SENSITIVITY

106dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23”w x 27.5”h x 18.5”d

WEIGHT

98 LBS

 

Retail $1289.90 Sale $999


Our updated version of that great 15” traditional 1970s bass sound. Deep, fat, and solid, this 2 X 15” has great classic character without losing definition at high levels. It comes with kick back rollers and both top and side handles. It also features an adjustable tweeter and great punch.

D215 XLT


Our updated version of that great 15” traditional 1970s bass sound. Deep, fat, and solid, this 2 X 15” has great classic character without losing definition at high levels. It comes with kick back rollers and both top and side handles. It also features an adjustable tweeter and great punch.

D215XLT SPECS

SPEAKERS

EC-1560ES

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

400W RMS

FREQ. RESPONSE

40hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23”w x 38.5”h x 18.5”d

WEIGHT

100 LBS

Retail $979 Sale $779


The 2 x 12" plus tweeter design of this enclosure is perfect for the player who needs to cover a wide variety of playing situations. The exclusive twin EC-1260F woofers and E-2700 Cast Bell tweeter deliver a low-end response similar to a 15”, but with the speed and smoothness of a 10” in the upper registers. Great for finger style players.

D212 XLT

The 2 x 12" plus tweeter design of this enclosure is perfect for the player who needs to cover a wide variety of playing situations. The exclusive twin EC-1260F woofers and E-2700 Cast Bell tweeter deliver a low-end response similar to a 15”, but with the speed and smoothness of a 10” in the upper registers. Great for finger style players.


D212XLT SPECS

SPEAKERS

EC-1260F x 2

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

400W RMS

FREQ. RESPONSE

40hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23”w x 27.5”h x 18.5”d

WEIGHT

74 LBS

Retail $929.90 Sale $739


A favorite with professionals, we consider this to be the best 210 enclosure available. Featuring our exclusive in-house, hand-made EC-1060XL Cast Frame woofers and an adjustable E-2700 Cast Bell tweeter. This little system has more deep bass than many other 4 x 10 designs. Its tight, deep, focused sound lets the true character of your instrument shine through.

D210 XLT

A favorite with professionals, we consider this to be the best 210 enclosure available. Featuring our exclusive in-house, hand-made EC-1060XL Cast Frame woofers and an adjustable E-2700 Cast Bell tweeter. This little system has more deep bass than many other 4 x 10 designs. Its tight, deep, focused sound lets the true character of your instrument shine through.


D210XLT SPECS

SPEAKERS

EC-1060XL Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

350W RMS

FREQ. RESPONSE

48hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23”w x 19.5”h x 18.5”d

WEIGHT

68 LBS

Retail $879 Sale $699


Our high-powered 400 watt 15" two-way system, featuring the fastest responding 15" speaker available, a classic bottom with great detail and transient response. The D115XLT features our new cast-frame EC-1500XL woofer with three inch high temperature voice coil and our E-2700 cast bell tweeter.

D115 XLT

Our high-powered 400 watt 15" two-way system, featuring the fastest responding 15" speaker available, a classic bottom with great detail and transient response. The D115XLT features our new cast-frame EC-1500XL woofer with three inch high temperature voice coil and our E-2700 cast bell tweeter.


D115XLT SPECS

SPEAKERS

EC-1500XL Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5KHz @ 18dB

POWER HANDLING

400W RMS

FREQ. RESPONSE

46hz - 14khz ±2dB

SENSITIVITY

100dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23”w x 25.5”h x 18.5”d

WEIGHT

59 LBS

Retail $719 Sale $579


The D112XLT is the newest of the Eden XLT Series. The D112XLT features a strong, aggressive character and an exceptionally open and sweet upper midrange. This is a very versatile and sensitive speaker system. It goes from slap, to rock, to jazz or other styles with ease. It does all this in a tiny light weight package, that’s easy to transport. This creates a new standard for 112 bass enclosures.

D112 XLT

The D112XLT is the newest of the Eden XLT Series. The D112XLT features a strong, aggressive character and an exceptionally open and sweet upper midrange. This is a very versatile and sensitive speaker system. It goes from slap, to rock, to jazz or other styles with ease. It does all this in a tiny light weight package, that’s easy to transport. This creates a new standard for 112 bass enclosures.
 


D112XLT SPECS

SPEAKERS

EC-1260M Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

2.5KHz @ 18dB

POWER HANDLING

250W RMS

FREQ. RESPONSE

32hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

21”w x 15.25”h x 14.5”d

WEIGHT

38 LBS

Retail $619 Sale $499


The D112XLT features a strong, aggressive character and an exceptionally open and sweet upper midrange. This is a very versatile and sensitive speaker system. It goes from slap, to rock, to jazz or other styles with ease. It does all this in a tiny light weight package, that’s easy to transport. This creates a new standard for 112 bass enclosures. This cabinet weighs 6 pounds less than our standard version.

D112 XLT

The D112XLT features a strong, aggressive character and an exceptionally open and sweet upper midrange. This is a very versatile and sensitive speaker system. It goes from slap, to rock, to jazz or other styles with ease. It does all this in a tiny light weight package, that’s easy to transport. This creates a new standard for 112 bass enclosures. This cabinet weighs 6 pounds less than our standard version.


D112XLT NEO SPECS

TWEETER

E-2700 Cast Bell

CROSSOVER

2.5KHz @ 18dB

POWER HANDLING

250W RMS

FREQ. RESPONSE

32hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

21”w x 15.25”h x 14.5”d

WEIGHT

32 LBS

Retail $699 Sale $529


David Series XST Cabinets

Our 1000 watt D410XST features a deeper,stronger low end than the XLT, and a more open, transparent midrange definition and exceptionally flat studio-like response along with reduced size and weight. The tone is wonderful, well-balanced with a smooth, effortless quality usually reserved for the studio. If you like high-definition and low distortion coupled with a big sound, this is well worth the auditioning. Massive internal bracing and optimum bracing make for extremely tight lows.

D410 XST

Our 1000 watt D410XST features a deeper,stronger low end than the XLT, and a more open, transparent midrange definition and exceptionally flat studio-like response along with reduced size and weight. The tone is wonderful, well-balanced with a smooth, effortless quality usually reserved for the studio. If you like high-definition and low distortion coupled with a big sound, this is well worth the auditioning. Massive internal bracing and optimum bracing make for extremely tight lows.

D410XST SPECS

SPEAKERS

EC-1060XS Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

1000W RMS

FREQ. RESPONSE

36hz - 14khz ±2dB

SENSITIVITY

104dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

23”w x 25”h x 18.5”

WEIGHT

95 LBS

Retail $1399 Sale $1049


For those players who need a portable, high performance rig with even more low end than the XLT, we have designed a new 2 x 10” cabinet for our latest XST woofers. This new 2 x 10” cabinet handles more power than many 4 x 10” cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp. Truly amazing low end output for a 2 x 10" enclosure.

D210 XST

For those players who need a portable, high performance rig with even more low end than the XLT, we have designed a new 2 x 10” cabinet for our latest XST woofers. This new 2 x 10” cabinet handles more power than many 4 x 10” cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp. Truly amazing low end output for a 2 x 10" enclosure.
 


D210XST SPECS

SPEAKERS

EC-1060XS Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

500W RMS

FREQ. RESPONSE

30hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23”w x 18”h x 18.5”d

WEIGHT

59 LBS

Retail $979 Sale $779


Our 1000 watt D410XST features a deeper, stronger low end than the XLT, and a more open, transparent midrange definition and exceptionally flat studio-like response along with reduced size and weight. The tone is wonderful, well-balanced with a smooth, effortless quality usually reserved for the studio. If you like high-definition and low distortion coupled with a big sound, this is well worth the auditioning. Massive internal bracing and optimum bracing make for extremely tight lows. This cabinet weighs 20 less than our standard version.

D410 XST Neo

Our 1000 watt D410XST features a deeper, stronger low end than the XLT, and a more open, transparent midrange definition and exceptionally flat studio-like response along with reduced size and weight. The tone is wonderful, well-balanced with a smooth, effortless quality usually reserved for the studio. If you like high-definition and low distortion coupled with a big sound, this is well worth the auditioning. Massive internal bracing and optimum bracing make for extremely tight lows. This cabinet weighs 20 less than our standard version.


D410XST NEO SPECS

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

1000W RMS

FREQ. RESPONSE

36hz - 14khz ±2dB

SENSITIVITY

106 dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

23”w x 25”h x 18.5”

WEIGHT

75 LBS

Retail $1599 Sale $1199


For those players who need a portable, high performance rig with even more low end than the XLT, we have designed a new 2 x 10” cabinet for our latest XST woofers. This new 2 x 10” cabinet handles more power than many 4 x 10” cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp. Truly amazing low end output for a 2 x 10" enclosure. This cabinet weighs 10 pounds less than our standard version.

D210 XST Neo

For those players who need a portable, high performance rig with even more low end than the XLT, we have designed a new 2 x 10” cabinet for our latest XST woofers. This new 2 x 10” cabinet handles more power than many 4 x 10” cabs on the market. The low end is full but tight, the mids are open and well defined and the highs are clear and crisp. Truly amazing low end output for a 2 x 10" enclosure. This cabinet weighs 10 pounds less than our standard version.


D210XST SPECS

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

500W RMS

FREQ. RESPONSE

30hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω

DIMENSIONS

23”w x 18”h x 18.5”d

WEIGHT

49 LBS

Retail $1079 Sale $799


David Series XL Cabinets

The EC-1800 Cast Frame woofer used in the D118 is responsive enough to play full range while delivering the strongest fundamental in the business. Matched with our 210 or 410 XLT series, the D118 delivers a massive but musical low end response that your audience can feel. This is the fastest 18" you will ever hear.

D118 XL

The EC-1800 Cast Frame woofer used in the D118 is responsive enough to play full range while delivering the strongest fundamental in the business. Matched with our 210 or 410 XLT series, the D118 delivers a massive but musical low end response that your audience can feel. This is the fastest 18" you will ever hear.


D118XL SPECS

SPEAKERS

EC-1800 Cast Frame

TWEETER

N/A

CROSSOVER

N/A

POWER HANDLING

500W RMS

FREQ. RESPONSE

42hz - 2.5khz ±2dB

SENSITIVITY

100dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

23”w x 27.5”h x 18.5”d

WEIGHT

74 LBS

Retail $829 Sale $659


David Series Moniter Cabinets

At the request of professional players, we fit our famous D210XLT system into a compact monitor package. The D210MBX retains all the sound quality and output level of the XLT enclosure. You’ll be amazed at the incredibly high sound pressure level and tremendous low end response this little system puts out. A must for difficult stage monitoring conditions.

D210 MBX

At the request of professional players, we fit our famous D210XLT system into a compact monitor package. The D210MBX retains all the sound quality and output level of the XLT enclosure. You’ll be amazed at the incredibly high sound pressure level and tremendous low end response this little system puts out. A must for difficult stage monitoring conditions.


D210MBX SPECS

SPEAKERS

EC-106O XL Cast Frame

TWEETER

E-2700 Cast Bell

CROSSOVER

3.5kHz @18db

POWER HANDLING

350W RMS

FREQ. RESPONSE

62hz - 14khz ±2dB

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω or 8Ω

DIMENSIONS

23w x 17”h x 15d

WEIGHT

50 LBS

Retail $779 Sale $599



E Series Head and Cabinets

Our new all-tube E300T amplifier is the perfect blend of old and new. And made for those who always loved that old-school tone, but hated the expense and hassle.

Our new all-tube E300T amplifier is the perfect blend of old and new. And made for those who always loved that old-school tone, but hated the expense and hassle.

 

E300 T

Our new all-tube E300T amplifier is the perfect blend of old and new. And made for those who always loved that old-school tone, but hated the expense and hassle.
We started with a classic, streamlined control set, then updated it with Overdrive switch to add extra grit from the preamp tubes and a Mid Shift switch (500Hz and 2.2KHz). The power section features a six-pack of KT-88s packing a 320W RMS wallop (@ 4 or 8 Ohms). Then we addressed the two major problems with tube amps. Allow us to explain:
Wouldn’t it be cool if you could replace a single tube if it failed or broke, instead of the entire set? And wouldn’t it be even cooler if you could fine-tune your bias setting for each tube quickly and easily every time you played? So you could have your perfect bias setting every time you turned the amp on? With the E300T, you can do both without the huge service bill. You’re welcome.
Other features include, -10dB Input Gain pad, 1/4" and NL-4 speaker output jacks, DI and tuner outs,  Footswitch for Mute and Overdrive, 8/4 ohm selector, and bias adjustment section. Then we put it all in its own rugged, fan-cooled road casing with flow-through ventilation, just like the old days.
Let’s re-cap. Killer old-school tone. Massive power. Perfect bias every time. And easy, cost-effective maintenance. Beauty and the Beast, all in one.

E300T SPECS

Power

320 W RMS

Power Mono Bridge

N/A

Frequency Response

20Hz-20KHz

Headroom

TBA

Dimensions

TBA

Weight

40 LBS



Here’s the Old School thump you’ve dreamed about. Dial the tweeter back for a traditional vibe, or turn it up for a more modern tone at the twist of a knob. For serious volume, stack up to four of them with your choice of Eden heads. Get the best of both worlds by combining an E115 with an E210. You’ll also get your guitarist’s attention, perhaps for the very first time.

 

E115 V8

Here’s the Old School thump you’ve dreamed about. Dial the tweeter back for a traditional vibe, or turn it up for a more modern tone at the twist of a knob. For serious volume, stack up to four of them with your choice of Eden heads. Get the best of both worlds by combining an E115 with an E210. You’ll also get your guitarist’s attention, perhaps for the very first time.


E115V8 SPECS

SPEAKERS

15" ES-15XL

TWEETER

E2600

CROSSOVER

3.5kHz. @ 18dB

POWER HANDLING

250W RMS @8Ω

FREQ. RESPONSE

38hz - 18khz ±2dB

VOICE COIL 2.5"

38 Oz. Magnet

SENSITIVITY

98dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

23"w x 25.5"h x 18.5"d

WEIGHT

59 LBS



Flexibility and portability are yours with the new E210. Create a modular rig by using up to four cabinets with one of our larger amps, and you can cover everything from rehearsals to large stages. For even more wallop, pair the 210 with our E115 for a huge sounding club rig. Your guitarist may never forgive you, but he’ll always respect you.

 

E210 V8

Flexibility and portability are yours with the new E210. Create a modular rig by using up to four cabinets with one of our larger amps, and you can cover everything from rehearsals to large stages. For even more wallop, pair the 210 with our E115 for a huge sounding club rig. Your guitarist may never forgive you, but he’ll always respect you.

E210V8 SPECS

SPEAKERS

2 x 10" ES-1040XL

TWEETER

E2600

CROSSOVER

3.5kHz. @ 18dB

POWER HANDLING

300W RMS

FREQ. RESPONSE

38hz - 18khz ±2dB

VOICE COIL 2"

32 Oz. Magnet

SENSITIVITY

99dB SPL@1W1M

IMPEDANCE

8Ω

DIMENSIONS

23"w x 17.5"h x 18.5"d

WEIGHT

60 LBS



We can sum the E410 in one word: Aggressive. Here’s a cabinet that’s perfect for clubs and main stages. Its punchy, tight sound will cut through any mix and let you effortlessly step out front when needed.

 

E410 V4

We can sum the E410 in one word: Aggressive. Here’s a cabinet that’s perfect for clubs and main stages. Its punchy, tight sound will cut through any mix and let you effortlessly step out front when needed.

E410V4 SPECS

SPEAKERS

4 x 10" E1040XL

TWEETER

E2700

CROSSOVER

3.5kHz. @ 18dB

POWER HANDLING

650W RMS

FREQ. RESPONSE

38hz - 18khz ±2dB

VOICE COIL 2"

32 Oz. Magnet

SENSITIVITY

100dB SPL@1W1M

IMPEDANCE

4Ω

DIMENSIONS

23"w x 27.5"h x 18.5"d

WEIGHT

90 LBS



The E810 is a brand new twist on the classic ‘70s 8x10 cabinet, yet it’s 1/3 smaller than its predecessors. Bass Guru David Nordschow accomplished this magic by creating an all-new bass reflex cabinet design, which offers all the tone you want combined with wonderful mobility. With powerhandling of 1000W RMS, the D810 is a perfect match for the WT800C and WT1205.

 

E810 V4

The E810 is a brand new twist on the classic ‘70s 8x10 cabinet, yet it’s 1/3 smaller than its predecessors. Bass Guru David Nordschow accomplished this magic by creating an all-new bass reflex cabinet design, which offers all the tone you want combined with wonderful mobility. With powerhandling of 1000W RMS, the D810 is a perfect match for the WT800C and WT1205.

E810V4 SPECS

SPEAKERS

8 x 10" ES-1040R

TWEETER

E2700

CROSSOVER

3.5kHz @18db

POWER HANDLING

1000W RMS @4Ω

FREQ. RESPONSE

52hz - 14khz ±2dB

VOICE COIL 2"

32 Oz. Magnet

SENSITIVITY

103dB SPL@1W1M

IMPEDANCE

4Ω

DIMENSIONS

22.9"w x 45.5"h x 16.25"d

WEIGHT

140 LBS



Nemesis Heads, Cabs and Combos

The RS400 bass amplifier features smooth, powerful FET sound in our first stand alone Nemesis amplifier. This comes with our simple and effective Nemesis preamp structure from the RS Series Combos. Some features include, switchable compression, 3 band EQ, enhance, a semi parametric EQ section, headphones, DI with level control and an effects loop. All this and a two year Eden warranty as well.

 

RS400

The RS400 bass amplifier features smooth, powerful FET sound in our first stand alone Nemesis amplifier. This comes with our simple and effective Nemesis preamp structure from the RS Series Combos. Some features include, switchable compression, 3 band EQ, enhance, a semi parametric EQ section, headphones, DI with level control and an effects loop. All this and a two year Eden warranty as well.

RS400 SPECS

POWER

400 Watts RMS @4Ω

PEAK POWER

800 Watts

FREQ. RESPONSE

10hz - 18khz ±2dB

DIMENSIONS

16"w x 3.5 "h x 10"d

WEIGHT

15 LBS